Four Common Issues Associated with Tile Installation

Published On May 1, 2019 | By Danny White | Home

Tile installations can involve some issues but they are usually a result of letting an inexperienced installer do the job. Unprofessional tile installers will install the tiles on surfaces without doing all the prep work. To makes sure your tiles will withstand the test of time, wan to be aware of the common problems associated with tile installation. They include the following:

Unstable Sub-Floor

Tiles are both hard and brittle. Thus, even if they do not bend or flex when they experience pressure, they can break. The chances of this taking place increase when the substrate is not stable. For instance, when tiling over a wood floor, it is important to reinforce it before laying tiles to make sure it doesn’t move or shift upon tile installation. Professional tile installers know how much movement they can allow so the tiles do not crack. Cracked tiles and grout are common signs of unstable sub-floors.

Wrong Tile Aligning and Spacing

Only professionals can accurately calculate and determine how to properly space tiles. Inexperienced DIY installers usually miscalculate how to space out tiles causing lopsided and crooked tile layout as well as uneven grout lines.

Grout Issues

There are a lot of ways grouting the floor can go wrong. Below are some of the scenarios:

  • Mixing the grout with too much water. This will prevent the grout from setting tight and make it prone to get brittle and break away from the tile. Also, this can cause the colour pigment not to fully develop so the grout will look pale.
  • Failing to use the right grouting tools. Using the right type of grout float is essential to the success of your tiling project.  Experienced tile installers will tell you that grout floats that have smooth edges are better than those with ridges to get the job done right.
  • Applying the grout immediately. Experienced tile installers allow the grout to sit in the bucket for around fifteen minutes or so. This provides enough time for the chemicals to interact with each other.

Tile Lippage

This problem can take place when two adjacent tiles are displaced vertically. For instance, the tiles might be spaced evenly in the width but not in height. In turn, this makes the tile job looking poorly done and a safety hazard. When you walk on tiles with plenty of lippage, you will feel that the floor is uneven. In fact, you trip or fall on the tiles.  For more information visit Céramique au Sommet.

Like this Article? Share it!

About The Author