leads to the failure of epoxy coatings

What leads to the failure of epoxy coatings?

Published On April 8, 2021 | By Poly Dom | Featured

Some of you might have decided to invest in your company by placing industrial floors. It is now time to make the most of that investment. Saving your investment begins with the installation procedure. While epoxy floor coatings are placed and appropriately applied, they are designed to stand for a long time.

Why epoxy floor coatings fail?

There are several reasons for epoxy floor coatings fail. A few of them are given below:

  1. Terrible surface preparation

Industrial floorings which last are a straight outcome of great surface preparation. This is a crucial step for the surface to join with the epoxy coating. A correctly equipped surface is dry, clean, dirt-free, and shot-blasted before the primer is employed.

  1. Stained floors

Epoxy flooring problemstake place while the customers wish to incise costs by placing epoxy coatings on an existing floor and not succeed in cleaning the surface correctly. A lot of industrial floors are stained with grease and oil. These greasy remains bring problems for a proper bond. Any grease or other compound remains should be cleaned accurately prior to applying the fresh coating.

  1. Misapplication of primer

While installing floorings, do not hold back on the primer. Heavy wear and tear is endured by the industrial floorings. Holding the gum would attach to the substrate and can result in long-term issues. Bear in head that all primers are not made identical. Specialists in polyaspartic flooring in Omaha can aid you in picking the ideal primer for the job.

  1. Condensation

Humidity and epoxy coatings do not play well with each other. What is the method by which you can fight condensation? You need to keep a check on the surface temperature, relative humidity, and air temperature. Having details of all the three, you can gauge the dew point. Dew point equals condensation on your solid surface. You can be placing defective flooring if you are having condensation (moisture) on the surface while coating.

Common epoxy coating problems

  1. Development of blisters and craters: Bubbles can come into sight in the coating surface after 100 percent solids epoxy is used to an absorbent concrete surface.
  2. Surface blushing: Amine blushing can lead to loss of shine and surface tawdriness, although the coating is securely treated. This can occur in areas having high humidity or near the water sources when the material is treated. Contact the top-rated providers of polyaspartic flooring in Omaha to get the job done with precision.

Like this Article? Share it!

About The Author